Engineering Documentation
Third-party tested performance data organized by regional standard.
Aluminum window systems are engineered to NFRC, CE, AS2047 and CSA performance thresholds. In-house QC data and third-party specimen documentation are available to support your local certification submission.
Regional Compliance
Select the report package that matches your target market. Datasheets are supplied after project and product scope confirmation.
Energy performance and structural compliance for US and Canadian building codes.
| Product | U-factor | SHGC | VT | Air | Water | Structural |
|---|---|---|---|---|---|---|
| Casement | 0.29 BTU/h·ft²·°F | 0.27 | 0.52 | 0.04 cfm/ft² | 7.5 psf | DP50 |
| Awning | 0.31 BTU/h·ft²·°F | 0.24 | 0.48 | 0.05 cfm/ft² | 6.0 psf | DP45 |
| Fixed | 0.25 BTU/h·ft²·°F | 0.30 | 0.58 | 0.01 cfm/ft² | 9.0 psf | DP60 |
| Sliding | 0.33 BTU/h·ft²·°F | 0.29 | 0.55 | 0.08 cfm/ft² | 5.5 psf | DP40 |
CE performance data for windows and doors, including thermal, weather and acoustic values.
| Product | Uw (W/m²K) | Air | Water | Wind | Acoustic Rw |
|---|---|---|---|---|---|
| Tilt-Turn | 0.8 | Class 4 | Class 9A | Class B5 | 38 dB |
| Casement | 1.1 | Class 4 | Class 8A | Class B4 | 35 dB |
| Fixed | 0.7 | Class 4 | Class 9A | Class B5 | 40 dB |
| Lift-Slide | 1.3 | Class 3 | Class 7A | Class B3 | 33 dB |
AS2047 performance data for Australian wind, water and glazing conditions.
| Product | Water (Pa) | Wind (Pa) | Air | Deflection |
|---|---|---|---|---|
| Awning | 300 | 2000 | 0.89 L/s·m² | Span/150 |
| Casement | 450 | 2400 | 0.72 L/s·m² | Span/150 |
| Sliding | 200 | 1600 | 1.45 L/s·m² | Span/180 |
| Double Hung | 150 | 1400 | 1.80 L/s·m² | Span/180 |
Canadian performance grades and ENERGY STAR thermal targets for cold-climate projects.
| Product | U-factor | ER | Air | Water | Zone |
|---|---|---|---|---|---|
| Casement | 1.4 W/m²K | 25 | A3 | B7 | A, B, C |
| Tilt-Turn | 1.2 W/m²K | 29 | A3 | B7 | A, B, C, D |
| Fixed | 1.0 W/m²K | 34 | A3 | B7 | A, B, C, D |
| Sliding | 1.7 W/m²K | 19 | A2 | B4 | A, B |
High-temperature, UV, thermal cycling and corrosion data for Gulf and desert climates.
| Product | Max Temp | Salt Spray | UV | Thermal Cycling |
|---|---|---|---|---|
| Sliding Door | 80°C | 3000 hrs | Class A | −20°C to +80°C |
| Curtain Wall | 85°C | 4000 hrs | Class A+ | −30°C to +85°C |
| Fixed Window | 80°C | 3000 hrs | Class A | −20°C to +80°C |
Documented factory quality management procedures from incoming profile inspection through final pre-shipment QC.
| Control area | Evidence | Review |
|---|---|---|
| Incoming materials | Profile, glass and hardware inspection | Documented |
| In-process production | Work instructions per station | Traceable |
| Final inspection | Four-stage QC and serial records | Recorded |
| Surveillance | Annual third-party audit | Current through 2027 |
Quality Management
Certificate No. SB-ISO9001-2024
Every production line follows documented procedures from raw profile inspection through final pre-shipment QC, with traceable records for every unit and annual third-party surveillance audits.
ISO
9001
ISO 9001 is factory quality management certification, not a regional window performance certificate. NFRC, CE, AS2047, CSA and NOA routes require product-specific specimens and engineering documentation.
Certification Support
Florida, USA
10 weeks
Test specimens and engineering documents aligned to the customer’s production configuration.
DP50+ casement and fixed windows
Queensland, Australia
8 weeks
Test specimens and engineering documents aligned to the customer’s production configuration.
Awning and casement windows
Munich, Germany
12 weeks
Test specimens and engineering documents aligned to the customer’s production configuration.
Tilt-turn and fixed windows
Certification FAQ
No. StarveilBuild is a certification-ready manufacturer. We provide DP50+ test specimens and engineering documentation for your local certification submission; the certificate is issued under your brand.
Orders can include in-house QC data, third-party specimen reports for the target market, drawings, material specifications and glass performance data.
Fees vary by standard and laboratory. The brand owner pays the laboratory directly while we provide the agreed specimens and engineering documentation.
The customer owns certificates issued under its company name and brand. StarveilBuild is listed as manufacturer of record where applicable.
A typical certification route takes approximately 8 to 12 weeks from specimen shipment to certificate issuance, depending on the standard and authority.
Yes. We can produce specimens with the same profile, glass, hardware and finish as the production configuration, with traceability records.