Munich, Germany
Munich Passive House Villa
Uw0.78 Tested | 86 Units
Europe Regional Solutions
CE EN14351 Passive House Uw0.8 Windows
Triple Glazing | PHI-Ready | Low Air Leakage
Minimal thermal break frames for European passive standards. Full notified body CE documentation.
CE EN 14351-1Target standardUw≤0.8 W/(m²K)Production target8–12 weeksTypical review cycle
Regional Compliance
European Passive House & Energy Performance Standards
Our passive house aluminum systems are engineered to EN 14351-1, Passive House Institute Uw0.8, and CE marking performance thresholds, with ITT/FPC documentation for notified-body review.
Certification partnership
Systems are engineered to European EN 14351-1 and Passive House performance targets. We provide ITT specimens, thermal calculations, installation details, and technical documentation for your notified-body submission. Final CE documentation is issued under the buyer’s company name.
View certification process →| Parameter | Our Production Target | European reference | Passive House / CE | Status |
|---|---|---|---|---|
| Thermal Transmittance Uw | Uw≤0.8 W/(m²K) | Uw≤1.0 | PHI target | In-house validated |
| Air Permeability | Class 4 | Required | Required | In-house validated |
| Water Tightness | Class E900 | EN 12208 | E900 | In-house validated |
| Wind Load | Class C5 | EN 12210 | C5 | In-house validated |
Certification Process
5-Step CE & Passive House Documentation Process
From thermal review to CE documentation, with a structured workflow for European project approval.
01
Requirements review
Review project climate zone, opening sizes, target standard, drawings, and local approval route.
Week 102
Test specimen production
Build full-size specimens to the nominated configuration, glazing, hardware, and performance target.
Week 2–403
Third-party laboratory testing
Coordinate the applicable accredited laboratory tests and record the performance data required for submission.
Week 5–804
Engineering document submission
Prepare calculations, drawings, installation details, declarations, and supporting test documentation.
Week 9–1005
Local documentation issuance
Support the nominated local authority, notified body, or certification route through final documentation.
Week 11–12Thermal targets, installation details, and CE documentation are confirmed against the project specification and nominated market.
Europe Projects
Delivered Regional Project References
Vienna, Austria
Vienna Passive Apartment
Uw0.80 | 156 Units
Zurich, Switzerland
Zurich Passive Office Tower
Uw0.75 | 412 Units
Regional Product Systems
Window & Door Systems for Europe
Uw0.8 Passive House Sliding Door
Thermally broken sliding door engineered to Uw≤0.8 W/(m²K) for passive house projects, with complete EN 14351-1 technical documentation for notified-body submission.
Discuss this system →
Uw0.8 Tilt-Turn Window
PA66 thermal-break tilt-turn window engineered to Uw≤0.8 thermal targets. ITT specimens are available for EN 14351-1 protocol review.
Discuss this system →
Uw0.75 Fixed Window
Triple-glazed fixed window engineered to Uw≤0.8 passive house targets, with ITT specimens available for notified-body certification.
Discuss this system →
Uw0.8 Entry Pivot Door
Heavy-duty entrance door engineered to European passive-house thermal thresholds with CE documentation for local authority approval.
Discuss this system →Engineering Review
Request a Europe Project Review
Send your drawings, performance targets, and project location. Our engineers will respond within 24 hours.
Start the technical review →FAQ
Can you provide CE documentation for project-specific configurations?
Yes. We review the profile, glazing, hardware, dimensions, and installation details before preparing the applicable technical documentation.
What is the thermal target for the European systems?
The range is engineered around Uw≤0.8 W/(m²K), subject to the selected configuration, dimensions, glass, spacer, and installation conditions.
Do you provide ITT specimens?
Project-specific specimens and supporting calculations can be prepared for the nominated notified-body or laboratory route.
Can the CE documentation be issued under our company name?
Documentation and declarations are coordinated through the applicable legal manufacturer and project certification route.