UAE
Dubai Luxury Villa
U≤2.0 | 186 Units
Middle East Regional Solutions
GSO SASO High-Temp Aluminium Windows & Doors
50°C Heat Resist | Salt Anti-Corrosion | Sand Dust IP54
Thermal-break frames and solar-control Low-E glass for GCC desert and coastal climates.
GSO / SASOTarget standardU≤2.0 W/m²KProduction target8–12 weeksTypical review cycle
Regional Compliance
High-Temperature & Corrosion Resistant Aluminum Window & Door Systems
Our high-temperature systems are engineered to GSO SASO, Dubai Municipality, Abu Dhabi UPC, and Saudi Building Code performance thresholds, with thermal, corrosion, and sand-dust data for GCC review.
Certification partnership
Systems are engineered for GSO SASO, Dubai Municipality, Abu Dhabi UPC, and Saudi Building Code targets. We provide thermal simulations, salt-spray data, sand-dust testing, full-size specimens, and installation documentation. Final compliance documentation is issued under the buyer’s company name.
View certification process →| Parameter | Our Production Target | GCC reference | GSO / SASO | Status |
|---|---|---|---|---|
| Thermal Transmittance | U≤2.0 W/m²K | ≤2.5 | ≤2.1 | In-house validated |
| Solar Heat Gain | SHGC≤0.25 | ≤0.30 | ≤0.25 | In-house validated |
| Air Infiltration | ≤0.3 L/s·m² | ≤0.5 | ≤0.5 | In-house validated |
| Water Penetration | 600Pa | 300Pa | 450Pa | In-house validated |
| Salt Spray Corrosion | 1000hr | 500hr | 720hr | In-house validated |
Certification Process
5-Step GCC Compliance Documentation Process
From heat and exposure analysis to GSO SASO and local authority documentation.
01
Requirements review
Review project climate zone, opening sizes, target standard, drawings, and local approval route.
Week 102
Test specimen production
Build full-size specimens to the nominated configuration, glazing, hardware, and performance target.
Week 2–403
Third-party laboratory testing
Coordinate the applicable accredited laboratory tests and record the performance data required for submission.
Week 5–804
Engineering document submission
Prepare calculations, drawings, installation details, declarations, and supporting test documentation.
Week 9–1005
Local documentation issuance
Support the nominated local authority, notified body, or certification route through final documentation.
Week 11–12Temperature range, solar control, salt exposure, dust sealing, and project authority requirements are confirmed before final configuration.
Middle East Projects
Delivered Regional Project References
UAE
Abu Dhabi Tower
SHGC 0.20 | 420 Units
Saudi Arabia
Riyadh Compound
IP54 | 312 Units
Regional Product Systems
Window & Door Systems for Middle East
Thermal-Insulated GCC Sliding Door
Thermal-break sliding door engineered for 50°C+ environments with heat-reflective Low-E glass and GSO SASO test specimen support.
Discuss this system →
Solar-Control Fixed Window
Solar-control fixed window with Low-E glazing engineered to reduce solar heat gain in GCC climates, with SASO energy-efficiency documentation.
Discuss this system →
Sand-Resistant Casement
Sand-resistant casement with triple-seal gasket and dust-resistant hardware engineered for desert air-infiltration requirements.
Discuss this system →
High-Temp Thermal-Break Door
Thermal-break entrance door with UV-stable powder coating engineered for 50°C+ Gulf conditions and GCC building-code submission.
Discuss this system →Engineering Review
Request a Middle East Project Review
Send your drawings, performance targets, and project location. Our engineers will respond within 24 hours.
Start the technical review →FAQ
How are the systems specified for 50°C+ climates?
Thermal breaks, Low-E glass, coatings, seals, hardware, and installation details are selected together for the project heat and solar exposure.
Can you support GSO or SASO documentation?
We can prepare thermal simulations, test specimens, salt-spray data, sand-dust information, and engineering documents for the nominated GCC route.
How is sand and dust infiltration controlled?
Casement and sliding configurations can use multi-seal systems, controlled drainage, and hardware selected for desert exposure.
Are coastal GCC projects supported?
Yes. Salt exposure, UV, heat, and wind requirements are reviewed by site, including Dubai, Abu Dhabi, and other Gulf coastal locations.